shafts

英 [ʃɑːfts]

美 [ʃæfts]

n.  (电梯的)升降机井; 通风井; 竖井; 井筒; (箭、高尔夫球杆等的)杆; (锤等的)柄; (机器的)轴
v.  亏待; 苛待; 欺骗
shaft的第三人称单数和复数

柯林斯词典

• N-COUNT (电梯等的)升降机井，竖井，井筒，通风井
  Ashaftis a long vertical passage, for example for a lift.
  1. He was found dead at the bottom of a lift shaft.
     他被发现死在了电梯井的底部。
  2. ...old mine shafts.
     老式矿井
• N-COUNT (机械的)轴，传动轴
  In a machine, ashaftis a rod that turns round continually in order to transfer movement in the machine.
  1. ...a drive shaft.
     驱动轴
  2. ...the propeller shaft.
     螺旋桨的传动轴
• N-COUNT (矛、高尔夫球棒等的)杆;(斧头等的)柄
  Ashaftis a long thin piece of wood or metal that forms part of a spear, axe, golf club, or other object.
  1. ...golf clubs with steel shafts.
     带钢杆的高尔夫球棒
• N-COUNT (光线、阳光等的)一束，一道
  Ashaft oflight is a beam of light, for example sunlight shining through an opening.
  1. A brilliant shaft of sunlight burst through the doorway.
     一束耀眼的阳光从门口照射进来。

双语例句

• Parallel shafts, however, can also be connected by gears of another type, and a spur gear can be mated with a gear of a different type.
  平行槽，不过，也可以连接齿轮的另一种类型，和一个正齿轮可以交配与齿轮的一种不同类型。
• Remove both drive shafts on transmission side and tie them up.
  拆下变速器侧的两个驱动轴并将它们绑紧。
• First, the complex gears and shafts coupling vibration equations was built based the transmitting structure.
  首先建立了传动系统的动力学模型，进行了动载分析；
• A long time ago they laid the track into the valley, bored the mine shafts.
  他们很久以前就把轨道辅进了山谷，打起了矿井。
• The carriage is supported on guide shafts. Remove thrust bearings from rear main bearing carrier.
  托架支承在导轴上。从后主轴承托架上拆下止推轴承。
• The small metal shaft will be removed, and I ll drill a hole to accept the radar shafts.
  小金属轴将被删除，我会钻一个孔，接受雷达轴。
• Remove Prop shafts ( refer to Group 2, Suspension and Driveshafts).
  拆卸支撑轴（请参阅第2单元悬吊和传动轴）。
• The carriage assembly is supported by four recirculating linear ball bearings and two hardened guide shafts.
  马车议会的支持，四循环直线轴承和两个硬化指导轴。
• It consists of shafts, culverts, channel and flood dam ( a small reservoir) composed of four parts.
  它由竖井、暗渠、明渠和涝坝（一种小型蓄水池）四部分组成。
• A new kind of NC system for machining shafts with non-circular cross-section is proposed in this paper.
  提出了一种新型的非圆轴数控加工系统，用于横截面为非圆形状的轴类零件加工。